 |
Anti-Twist Plates
|
Cameras mounted to flash brackets of any brand, including Stroboframe
tend to twist or rotate on the camera mounting screw. Cork or rubber
friction pads help, but the real solution is to use a camera-specific
Anti-Twist (AT) Plate. They act as an interface between the camera
and bracket, pin-register to the bracket and conform to the camera's
baseplate. This locks the camera to the bracket to prevent twisting.
Because there are so many camera configurations, AT Plates are sold
separately. Also, because Stroboframe Anti-Twist Plates are interchangeable,
your bracket will never become obsolete when you buy different equipment!
- Note:
Camera Anti-Twist Plates are not compatible with QuickFlip models.
- When
using Pro-T or Press-T model brackets with heavier flash units,
we consider the use of a Camera Anti-Twist Plate mandatory.
|
Digital Camera Models |
AT-Plate |
Canon EOS 10D, Canon EOS Digital Rebel,
Canon EOS 1Ds,
Fuji FinePix S3 Pro,
Nikon D2h |
300-EOS |
Canon EOS 10D w/ Battery Pack |
CORK PAD* |
Canon EOS Rebel XT w/ Battery Pack |
CORK PAD* |
Canon EOS 1D, Canon EOS Digital Rebel w/ Vertical Grip, Canon EOS 20D w/ Battery Pack, Canon EOS 1D Mark II,
Nikon D1h, Nikon D2hs |
300-BE1 |
Fujifilm FinePix S2 Pro |
300-FS1 |
Canon EOS 20D, Canon EOS Rebel XT,
Fuji Finepix S7000, S3 Pro,
Nikon D100,
Pentax *istD |
300-SLR |
| Kodak DCS Pro 14n |
CORK PAD* |
| Kodak Easyshare DX6490 |
|
| Nikon D1X, D2X |
300-EOS |
| Nikon D70 |
300-NF4 |
| Nikon Coolpix 5700 |
CORK PAD* |
| Olympus E-1 |
CORK PAD* |
| Olympus E-1 w/ Battery Pack |
|
| *AT-Plate not applicable: cork pad (supplied with all Stroboframe brackets) provides adequate anti-twist prevention. |
| |
AT-Plate |
| Nikon SC-17 off-camera cord |
300-C17 |
| Nikon SC-29 off-camera cord |
300-C29 |
| Quantum Q-Flash |
300-QFL |
| Lumedyne flash heads |
300-LUM |
|
AT-Plate |
35mm SLR CAMERAS (unless otherwise specified) , Nikon Coolpix Cameras, Nikon N80, Nikon N80 w/MB16 Grip |
300-SLR |
Bronica ETR |
300-ETR |
Bronica ETR with speed grip |
300-ETR |
Bronica ETR with motor (on Pro-RL only) |
CORK PAD* |
Bronica SQA |
300-SQA |
Bronica SQA with speed grip on Pro-SQ |
CORK PAD* |
| Bronica SQA with motor (on Pro-SQ only) |
CORK PAD* |
| Bronica GS1 |
300-GS1 |
| Bronica GS1 with speed grip |
300-ETR |
| Canon EOS-1N, EOS-1, EOS IV and EOS-3, Canon Elan 7 w/ BP 300, EOS 1V-35 |
300-EOS |
| Canon EOS-1 and EOS-1N with BP-E1 or E1, Canon D30 w/BG-ED3, Canon Elan 7, Canon EOS 3 w/ Vertical Grip, Canon 1V-35 w/ Battery Pack |
300-BE1 |
| Canon A2, Nikon F6 |
300-H35 |
| Canon A2, A2E with VG10 vertical grip |
300-VG1 |
| Canon Elan II and Elan IIE with BP-50 |
300-BP5 |
| Canon Elan and Elan II |
300-H35 |
Hasselblad |
300-HAS |
Mamiya (all except Mamiya 6) |
300-MAM |
Minolta 800SI |
CORK PAD* |
Minolta Maxxum 9 |
300-H35 |
Nikon F5, Nikon F6 w/ MB40 |
300-NF5 |
Nikon F4 with MB21 battery pack |
300-NF4 |
Nikon F4 with MB20 battery pack |
300-H35 |
Nikon N90, N90s, F100, D1X |
300-H35 |
Nikon N90s with MB10 or F100 with MB15 |
300-BE1 |
Nikon F4 and F4e with MB23 |
300-BE1 |
| Pentax 645 and 645N |
300-PTX |
| Pentax 6x7 (on Pro-T only) |
300-PTX |
| *AT-Plate not applicable: cork pad (supplied with all Stroboframe brackets) provides adequate anti-twist prevention. |
|
